Univers U4128 Bedienungsanleitung Seite 44

IMAGE 2
IMAGE 3
QUICK INSTALLATION GUIDE
manual of this system to get the correct information.
Single search
: You can edit the following items (Image 2):
1. Satellite: Press [
enter satellite list to select directly.
2. LNB Confi guration: Selecting this option and pressing [OK],
the LNB Confi guration menu will be displayed. In this menu,
next options can be modifi ed (Image 3):
- LNB Type: Press [
and "Universal" mode. If you select "Standard" or "User", the
frequency of the LNB can be changed. Pressing [OK] the
frequencies will appear to be edited. Select the frequency
you want to edit and change the value with [
- 22K: Use [
nal is used in KU Universal LNBs to change between low
band and high band. After choosing LNB type "Universal"
you cannot modify 22K.
- DiSEqC1.0: Use [
switches.
- DiSEqC1.1: Use [
switches.
- Positioner: * This receiver does not allow moving Diseq
motors
- Polarity: Press [
Once the LNB is confi gured, press [Exit] to save the chan-
ges and go to the previous window to continue confi guring
the antenna.
- Toneburst: Press [
3. DiSEqC1.0: Use [
switches.
4. On "TP Index" item use [
transponder.
5. In the "FTA Only" item, press [
free channels or even scrambled channels. If you select "Yes" it
will scan free channels only.
6. In "Scan Channel" item, press [
+ Radio Channels, or just TV channels or just Radio channels.
7. In "Scan Mode" item you can select "Auto Scan" to blind
scan or "Preset Scan" to scan all preset transponders.
8. Move the highlight to "Search" and press [OK] button to
start scanning. Bars are showing the progress of the channel
scanning in the lower part of the window and the found channels
are listed.
You can stop the scan with [Exit] and save the so far found
channels.
9. Press [Exit] to exit this menu. A window to confi rm the
changes will appear.
PAG. 5
] to switch Satellites or press [OK] to
] to switch among "Standard", "User"
] to switch "ON" and "Off". The 22 kHz sig-
] to switch the options of DiSEqC
] to switch the options of DiSEqC1.1
] to switch between "Auto / H / V".
] to switch this function "On" or "Off".
] to switch the options of DiSEqC
] to select the desired
to select to scan only
] to select to scan TV
]