IFM Electronic AL1020 Gerätehandbuch Seite 48

IO-Link Master
Attribut Name
6 Interface control
– Control bits
– Forced inter-
face speed
7 Interface type
8 Interface type
48
Zugriff Datentyp
Get, Set STRUC of:
– WORD
– UINT
Get
Get
Beschreibung
Configuration
for physical
interface
Interface control bits
Bit 0 Auto negotiate (set)
0 = Auto negotiation
1 = Auto negotiation
Bit 1 Forced duplex mode (set)
0 = Half duplex
1 = Full duplex
Set only if auto negotiati-
on is disabled
Bit 2���Bit 15 Reserved, shall be set
The Forced interface speed bits indicate
the speed at which the in- terface shall
operate�
10 = 10 Mbps
100 = 100 Mbps
Set only if auto negotiation is disabled�
Indicates the type of the physical interface�
0 = Unknown interface type
1 = The interface is internal to the device
2 = Twisted-pair
3 = Optical fiber
4 ... 255 = Reserved
Indicate the current operational state of
the interface�
0 = Unknown interface state
1 = The interface is enabled and is ready
to send and receive data�
2 = The interface is disabled�
3 = The interface is testing�
4 ... 255 = Reserved
disabled
enabled
to 0