Brother KIT I Installationsanleitung Seite 9

When using USB media to perform the installation
m
While pressing the "Automatic Threading"
button, turn the sewing machine on.
n
Copy the upgrade program downloaded in
f
step to the USB media.
Note
• Copy only the upgrade program to a clean re-
formatted USB media; no other files should be on
this media.
o
Press .
p
Insert the USB media into the primary (top)
USB port connector on the right side of the
machine. It will take a few seconds until the
machine recognizes that the USB media has
been inserted into the port.
q
Press .
Note
When the message "Upgrade complete." appears,
installation of the upgrade application has been
completed.
(If an error occurs, a message will appear in red.)
r
Remove the USB media.
s
Continue with step on page 9.
7