Nowsonic EarIn Bedienungsanleitung Seite 5

EarIn
GB
User manual
Contents
Introduction
Features
Applications
Controls and connectors on the bottom
Controls and connectors on the top panel
Operation
Specifications
Scope of supply
Disclaimer
Servicing
Legal information
Introduction
Thank you very much for purchasing the Nowsonic EarIn headpho-
ne amplifier! Nowsonic EarIn is a compact, stereophonic amplifier
unit which amplifies the incoming signals to a connected In-ear or
circumaural headphone. EarIn can be fed with a stereophonic or two
monophonic signals which are connected via the two balanced XLR
inputs. Depending on the chosen mode (Mono or Stereo), a Balance
knob sets the volume ratio for both inputs. EarIn provides high output
power which makes this monitoring solution especially suitable
for stationary use on stage or in the recording studio. The drummer,
keyboard or horn player can adjust the level of the monitor signal as
required while an integrated limiter protects the unit from clipping. In-
ear or circumaural headphones (not supplied) like the Nowsonic Prinz
are recommended for monitoring. Nowsonic EarIn can be comfortably
mounted to the belt via a clamp. Power can be supplied via a 9V batte-
ry (optional) or the DC adapter (included).
NOTE: Using the unit with high volume may cause serious hea-
ring damages. Please set the volume as low as possible so that
you can comfortably hear the monitoring signal.
6
www.nowsonic.com