Behringer X AIR X18 Schnellstartanleitung Seite 8

14 X AIR X18/XR18
DIGITAL iPAD/TABLET MIXER X18/XR18 Controls
(1)
(8) (9) (10) (11)(12)
ETHERNET
ACCESS
POINT
USB REMOTE
(10) (12)(11) (13) (9) (14)
(1)
(15)
(2) (3) (4)
(5)
(6) (7)
(13) (14) (15)
OUT IN PERSONAL
MONITORING
5 3 1
6 4
2
WIFI CLIENT
MIDI ULTRANET AUX SENDS
(16)
(7)
(2) (6)
15 Quick Start Guide
(EN) Step 2: Controls
(1)
INPUTS accept balanced and
unbalanced XLR and ¼ " plugs.
Inputs 1 and 2 have high-
impedance preamps for direct
connection of guitars and basses.
(2)
OUT L & R jacks send the main mix
signal to PA or monitor speakers via
XLR cables.
(3)
RCA IN jacks (X18 only) accept
unbalanced RCA cables for
connecting MP3 players, external
mixers, iPad, etc. These inputs have
limited processing compared to the
other input channels.
(4)
RCA OUT jacks (X18 only) send
either the main mix signal or
headphone signal via unbalanced
RCA cables to a pair of active
studio monitors.
(5)
CONTROL ROOM button (X18 only)
determines whether the main mix
or headphone/solo signal is routed
to the RCA OUT jacks.
(8)
(6)
HEADPHONE jack accepts a
¼ " TRS plug for connecting a pair
of headphones.
(7)
PHONES LEVEL knob determines the
output of the headphones jack.
(8)
POWER switch turns the power on
and off . The LED on the main input
panel will light when the unit is
powered on.
*Windows is either a registered trademark or trademark of Microsoft Corporation in the United
States and/or other countries.
(9) (15)
USB port (type B) accepts a USB AUX SEND jacks send your monitor
cable for connection to a computer mixes to active stage monitors or
for multi-channel audio and MIDI headphone mixers. The XR18 uses
recording. Up to 18 audio channels XLR connectors, while the X18 uses
can be simultaneously recorded, balanced ¼" jacks.
and 18 channels are available for
(16)
Inputs 17 and 18 (XR18 only)
playback. The mixer application
accept balanced ¼ " cables for
allows assignment of channels
connecting line-level sources.
for recording and playback.
These inputs have limited
16 channels of MIDI I/O can also
processing compared to the other
be transmitted on the same USB
input channels.
connection. Check the product page
on behringer.com to download the
required (Windows*) driver and the
full manual for a comprehensive
explanation of the interface.
(10)
ETHERNET port allows the mixer to
be controlled via LAN or connected
Wifi router.
(11)
RESET button resets the console to
default network parameters when
held for 2 seconds. When held for
10 seconds, all console functions
are reset to factory default status.
(12)
REMOTE switch selects between
Ethernet, Wifi client, or Access
Point. See the Network Connection
chapter for details.
(13)
MIDI IN/OUT jacks send and
receive MIDI signals to and from
external equipment. See the MIDI
Implementation chart for details.
(14)
ULTRANET port allows connection
of BEHRINGER P16-M personal
monitoring mixers or P16-D
distribution hubs.