Herunterladen Inhalt Inhalt Diese Seite drucken

A Einleitung; B Normen/ Richtlinien; A Introduction; B Standards/ Guidelines - Roller DHN EC Montageanleitung

Deckenluftkühler
Inhaltsverzeichnis

Werbung

A Einleitung

Die deutsche Fassung der
Montageanleitung ist das
Original.
Alle Sicherheitstexte und
Hinweise sind kursiv gesetzt.
Bewahren Sie diese
Montageanleitung auf, sie ist Teil
der Dokumentation der
Kälteanlage.
Die jeweils aktuelle Fassung
dieser Montageanleitung kann auf
unserer Website
http://inst.walterroller.de
heruntergeladen werden.

B Normen/ Richtlinien

Die Normenreihe EN 378
"Kälteanlagen und
Wärmepumpen -
Sicherheitstechnische und
umweltrelevante Anforderungen"
dokumentiert die Anforderungen,
die der Errichter sowie der
Betreiber der Kälteanlage erfüllen
müssen.
Der Luftkühler DHN ist nach EN
378-2 Absatz 5.2.1 eine
Rohrschlange mit Luft als
Sekundärfluid, und entspricht den
Anforderungen von EN 14276-2
mit Punkt 5.2.2.2 der EN 378.
Je nach Art der Errichtung der
Kälteanlage ergeben sich
unterschiedliche Anforderungen
an die elektrische Absicherung
des DHN. Eine der folgenden
Normen muss zu Bewertung der
sicherheitstechnischen
Anforderung herangezogen
werden:
o
EN 60335-2-40,
o
EN 60335-2-89
o
oder EN 60204-1.
Der Luftkühler DHN stellt eine
unvollständige Maschine nach
Maschinenrichtlinie dar. Daher
erhält er keine CE
Kennzeichnung. Das CE Zeichen
auf Ventilatoren und Heizstäben
bestätigt die Konformität dieser
Komponenten mit den auf sie
zutreffenden Richtlinien (z.B.
Niederspannungsrichtlinie, ERP
Richtlinie).
4

A Introduction

This mounting instruction is a
translation of the german original
Montageanleitung.
All safety information and advice
is printed in italics.
Keep these instructions; they
are part of the refrigerating plant.
You can download the latest
revision of these mounting
instructions on our website
http://inst.walterroller.com.
B Standards/ Directives
The standard series EN 378
"Refrigerating systems and heat
pumps- Safety and environmental
requirements" documents the
requirements, which the builder
and the operator of the
refrigeration plant have to comply.
The unit air cooler DHN is a coil
with air as secondary fluid
according to EN 378-2 paragraph
5.2.1. It fulfills the requirements of
EN 14276-2 and paragraph.
5.2.2.2 of EN 378.
Depending on the type of
refrigeration system there are
different requirements for electric
safety. One of the following
standards has to be obeyed,
when designing and installing the
plant:
o
EN 60335-2-40,
o
EN 60335-2-89
o
or EN 60204-1.
The air unit cooler DHN is an
incomplete machine, according to
the EC machinery directive.
Because of that it isn't labeled
with the CE sign. The CE sign
visible on fans, heaters etc.
shows that these components are
in conformance with other
directives (e.g. ERP directive,
low- voltage directive).
A Introducción
Estas Instrucciones de Montaje
han sido traducidas del original
en Alemán Montageanleitung.
Las indicaciones e instrucciones
de seguridad se han escrito en
letra cursiva.
Conserve estas instrucciones,
son parte de la información
técnica de la instalación
frigorífica.
Puede Vd. descargar la última
edición de estas instrucciones de
montaje en nuestra página web:
http://inst.walterroller.com.

B Normas/ directivas

• La Normativa EN 378 "sistemas
de refrigeración y bombas de
calor-seguridad y requisitos
ambientales" documenta los
requisitos que deben cumplir el
fabricante y el técnico de la
instalación frigorífica.
• El evaporador DHN es una
batería con aire como fluido
secundario, según la norma EN
378-2 párrafo 5.2.1. Cumple con
los requisitos de la EN 14276-2 y
el párrafo. 5.2.2.2 de la EN 378
• Dependiendo del tipo de
sistema de refrigeración existen
diferentes Normas de seguridad
eléctrica. Una de las siguientes
Normas tiene que ser de obligado
cumplimiento, en el diseño e
instalación de la planta:
o
EN 60335-2-40,
o
EN 60335-2-89
o
or EN 60204-1.
•El evaporador DHN es una
máquina incompleta, según la
Directiva de maquinaria CE. Por
eso no contiene el símbolo CE.
La CE se muestra visible en los
ventiladores, calentadores etc., y
demuestra que estos
componentes están en
conformidad con otras directivas
(por ejemplo, la Directiva BT,
Directiva de baja tensión).

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis