ALLGEMEINES DAS GEHÄUSE Der LAKE PEOPLE MI-DAC F48 ist ein Digital- Das geerdete Gehäuse besteht aus 3 mm star- Analog Wandler höchster Qualität mit eingebau- kem Aluminium- und 1.25 mm starkem Stahl- ter Abhör- und Kopiermatrix für acht digitale blech.
Seite 3
DIE DIGITALEN AUSGÄNGE Die beste Alternative zum (entfernbaren) Be- schriften sind Folien von Beschriftungsgeräten Der MI-DAC F48 stellt einen symmetrischen z. B. von Brother, Canon oder Dynax. und einen koaxialen digitalen Ausgang zur Ver- fügung.
Seite 4
Eingangs blinken und die grüne "LOCK"-LED nicht leuchten. DER D/A WANDLER-CHIP Dieser Mute kann nicht über den "MUTE"-Ta- Der D/A Wandler des MI-DAC F48 ist in der ster zurückgesetzt werden! Standardausführung ein 48 kHz - 24-Bit Wand- ler mit 105 dB Dynamik.
Seite 5
Gleichzeitiges Betätigen des "R"- und "L"-Ta- sters bewirkt eine Kanalumkehr im MI-DAC F48. Die analogen Ausgänge des MI-DAC F48 befin- D. h., der rechte Kanal wird im linken Ausgang den sich auf der Rückseite und sind als elek- wiedergegeben, und der linke Kanal wird im tronisch symmetrische XLR Verbinder ausge- rechten Ausgang wiedergegeben.
Seite 6
VARIABLE ANALOG OUTPUTS WIE FUNKTIONIERT'S Die analogen Ausgänge des MI-DAC F48 befin- PRÄMBEL den sich auf der Rückseite und sind als elek- Der MI-DAC F48 bietet in seinen verschiedenen tronisch symmetrische XLR Verbinder ausge- Versionen Spitzentechnologie. führt. Durch die gestaffelten Ausführungen ist es dem Sie sind im Ausgangsfeld mit "LEFT (VA-...
Die über LEDs angezeigte Sample-Rate wird Daher ist die Frequenz der digitalen (Stör)-sig- über einen Prozessor ermittelt und nicht aus nale sehr gross zur analogen Nutzfrequenz. Es dem Eintrag im Datensignal abgeleitet. müssen an die folgenden analogen Tiefpassfil- Auf den Receiver folgt der Digital-Analog Wand- ter nur noch geringe Anforderungen bezüglich ler-Chip.
GENERAL THE CASE The LAKE PEOPLE MI-DAC F48 is a D/A con- The earthed case is made of 3mm aluminium verter of highest quality with a built-in monitor- and 1.25mm steel sheet and therefore with- and copy matrix for eight digital inputs.
Seite 9
THE DIGITAL OUTPUTS The best alternative are labeling foils of labeling machines for instance from Brother, Canon or The MI-DAC F48 offers a balanced and a co- Dynax. axial digital output. Independent from their design, data words -...
Seite 10
The function is usefull to review the stereo ima- may be updated with other converter chips in ge of the source. the future. LAKE PEOPLE will inform about updates on THE "R"-BUTTON their web-site www.lake-people.de! When pressing the "R"-button the yellow "R"- LED is lit and only the right channel is output on both channels.
Seite 11
THE "L"-BUTTON FIXED ANALOG OUTPUTS When pressing the "R"-button the yellow "R"- The MI-DAC F48 fixed analog outputs are loca- LED is lit and only the right channel is output on ted on the rear panel and equipped with elec- both channels.
Seite 12
PREFACE passed to the D/A section's receiver circuit, specially designed for this kind of signals. The MI-DAC F48 in all its available versions of- The receiver circuit prepares the signals for fers high-end technology. being processed by the following stages.
TECHNICAL SPECIFICATIONS (All measurements A-weighted, 20 Hz... 20 kHz, 44.1 kHz sample-rate referred to digital full scale and +20 dBu analog level) Digital Inputs: - 3 x transformer balanced, 110 ohms, XLR, acc. to AES 3-1992 - 3 x unbalanced, 75 ohms, Cinch, according to IEC 958 - 2 x optical, TOS-Link according to EIAJ RC-5720 Digital Outputs: - 1 x transformer balanced, 110 ohms, XLR, acc.
We herewith declare that the following unit complies to the below mentioned regulations. Bezeichnung / Name: 24 BIT D-A CONVERTER with 8 INPUTS Typ / Type: MI-DAC F48 Serien Nr / Serial No.: - alle / all - Seit / Since: 1999...