Specification - August EP650C Bedienungsanleitung

5.4 Hands-free Calling
Whilst connected to your mobile phone, the EP650C will act as a
hands-free system for calls.
Press to pick up or hang up a call. Press and hold
seconds to reject the incoming call..
During a call, double press
headphones and your mobile phone.
5.5 Audio-In
To use the EP650C as a pair of wired headphones, use a 3.5mm
audio cable to connect the EP650C to your source device. Once
the audio cable is connected to the EP650C, the device
automatically switches to wired mode.
5.6 Wired Use USB Cable
To use the EP650C as an audio out device for your computer,
ensure the EP650C is turned off, then connect it via the included
USB cable. The driver will install automatically.
To set the EP650C as the current audio out device, select "sound"
from the control panel, then highlight "Headphones" and click
"Set Default".
Whilst connected to a computer as an audio out device, the
EP650C battery will continue to charge.
6. Charging
When the power is low, the status LED flashes red.
To charge the EP650C, connect the micro USB lead to the device's
power socket, and the other end of the USB cable to a powered USB
port. The status LED constantly lights red whilst charging and lights
blue once the battery is fully charged.
for 2
to transfer the call between the
-7-
Note:
1) You must select a qualified charger from a regular manufacturer.
2) Make sure that the headphone is fully charged for at least 6 hours
for the first time.
3) The headphone must be charged before use if it hasn't been used
for more than 1 year.

7. Specification

Bluetooth Specification
Operating Range
Frequency Response
Speaker Output
SNR
Distortion
Battery
Working Time
Charging Time
Standby Time
Weight
Dimensions
Bluetooth v4.1 and aptX
Up to 10m
60Hz – 20KHz
30mW
≥85dB
≤1.0%
3.7V/220mAh Built-in
Li-Polyme Battery
10 hours
2 Hours
30 Days
235g
176.6 x 188.6 x 71mm
-8-