Wet Vacuum Cleaning; Interrupting Operation; Finish Operation; Maintenance And Care - Kärcher AD 3.000 Originalbetriebsanleitung

Wet vacuum cleaning

Attach the accessories to vacuum

moisture or wetness to the suction
pipes or directly to the handle.
Warning
The liquid volume of 2.5 litres must not
be exceeded.
Immediately switch the appliance off or
pull the power plug if foam forms or liq-
uids escape!
Note: Empty the vacuum cleaner im-
mediately after wet vacuuming and let
it dry. Otherwise, there is a risk of cor-
rosion.

Interrupting operation

Turn off the appliance.


Finish operation

Turn off the appliance and discon-

nect the mains plug.
Empty the container
Illustration

Remove the appliance head and fil-
ter basket and empty the reservoir.
Storing the appliance
* depending on model
Illustration

Stow away the mains cable and ac-
cessory at the machine. Store the
appliance in a dry room.

Maintenance and care

Danger
Turn off the appliance and remove the
mains plug prior to any care and main-
tenance work.
Repair works may only be performed
by the authorised customer service.
Warning
Do not use abrasives, glass or univer-
sal cleaners! Never immerse the appli-
ance in water.
Clean the appliance and accessory

parts made of plastic with a com-
mercial plastic cleaner.
If required, rinse the container and

accessories with water properly
and dry them before reuse.
Clean flat fold filter
Illustration
Remove the appliance head. Re-

move the frame and filter and knock
the dirt out of the filter. Clean the fil-
ter under running water if neces-
sary. Do not rub or brush the filter
dry.
Let it dry completely prior to instal-
lation.
Illustration
After that, insert the filter first and

then the frame.
Insert and lock the appliance head.
– 10
EN 17