Pioneer KRF-9000FD Bedienungsanleitung Seite 29

Install1 > Input info.
a
Input info.
Sets whether to display the input when switching input.
5 sec
Off
Install1 > Flip H
b
Flip H
Select this when the image is projected from the back of the screen or when the projector is hung from the ceiling.
Off
On
Install1 > Flip V
c
Flip V
Select this when the projector is hung from the ceiling.
Off
On
Install1 > Fan Speed
d
Fan Speed
Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).
Normal
High
Install2 > Back Color
e
Back Color
Configures the screen colour displayed when there is no input signal.
Blue
Black
Install2 > No Signal Off
f
No Signal Off
Sets the lapse time before automatically switching to the standby mode when there is no input signal.
15
30
60
Off
Displays for 5 seconds.
Do not display.
Do not flip image to the left or right.
Flips image to the left or right.
Do not flip image up or down.
Flips image up or down.
Do not activate.
Activate.
Sets screen colour to "Blue".
Sets screen colour to "Black".
Switch to standby mode after 15 minutes.
Switch to standby mode after 30 minutes.
Switch to standby mode after 60 minutes.
Do not switch to standby mode.
ENGLISH
29