Pioneer KRF-9000FD Bedienungsanleitung Seite 26

4
Setting Menu (Continued)
Setup > Picture Position
M
Picture Position
Adjusts the horizontal/vertical position of the projected image.
The display position value varies with the input signal.
This adjustment is available for analogue input signals, or for COMPONENT and HDMI-1/2 input signals when "V-Stretch" is set
to "On".
Setup > HDMI Signal Type
N
HDMI Signal Type
Configures the input level setting of the HDMI input terminal.
VIDEO
PC
This setting is available only when projecting the HDMI input.
Setup > Screen Crop
O
Screen Crop
Masks (Hides) the outer area of the projected image.
2.5%
5%
Off
Masking is available only when high definition images are input.
Setup > Overscan
P
Overscan
Selects whether or not to set overscan for the 4:3 video signals (NTSC, PAL, SECAM, 480i, 576i, 480p and 576p).
Off
On
This setting is not available when PC signals are input to HDMI terminal.
Source > Video Format
Q
Video Format
Configures the input signals of the component video input terminals.
Component
RGB
SCART
This setting is available only when projecting the component video input.
Source > HDMI
R
HDMI
Configures the input signals of the HDMI input terminal.
Auto
Component(4:4:4)
Component(4:2:2)
RGB
This setting is available only when projecting the HDMI input.
26
Settings
For normal circumstances, select this setting.
Select this setting when the black-and-white of the projected image is unclear when
RGB video signals are input from DVI devices.
Masks 2.5 % of the screen.
Masks 5 % of the screen.
No masking.
No overscan.
Overscans the top, left, bottom and right at 2.5 % each.
Select this when component video signals are input.
Select this when RGB video signals are input.
Select this when RGB video signals and sync signals are input from SCART plug for
European market.
Automatically configures input signals.
Select this when Component(4:4:4) video signals are input.
Select this when Component(4:2:2) video signals are input.
Select this when RGB video signals are input.