Assembling And Disassembling - FACAL CASTIGLIA Gebrauchs- Und Wartunghandbuch

ASSEMBLING AND DISASSEMBLING

INTRODUCTION: The assembling and disassembling
need at least two people.
SEQUENCE OF OPERATIONS FOR THE ASSEMBLING:
A)
Starting from the "closed" position (picture 1), open the platform
putting the work top in a horizontal position (picture 2)
SCREW FOR THE
DIAGONALS' FIXING
A
D)
Before using the platform block the brake of the front wheels
(detail A). Assemble the stabilizers where they are required by
the norm and block it firmly through the hand-wheels.
D
A
F) STABILITY
According to the European Norm EN 131 1/2/3/7
the stabilisers are obligatory as below indicated:
• Small stabilisers (code D660/1 ) up to CA7/250
• Maxi stabilisers (code D662/1) up to CA14/400
DIAGONAL
DET AIL
(when diagonals
are double)
A
DIAGONAL
DET AIL
STABILIZER
E)
B
A
STABILIZER
B
B)
Secure the side diagonals with the screws placed
on the standards.
C)
Thanks to the hand-wheel, block the work top
(detail B). Continue the assembling plugging the
object holder plane and fixing it with the
hand-wheels (detail A)
When you climb and get down off it's necessary to watch the
platform.
Never turn back on it.
7
A
Fig. 1
C
E
Fig. 2
A
A
B
B