Lake People SRC C420 Bedienungsanleitung Seite 13

As long as a valid clock information is
-
generated by the the sync module, a valid
AES empty frame is always output from
the SRC.
A faulty sync signal is displayed by the red
-
"ERRor" LED of the sync display. In this
case the outputs are muted.
THE DIGITAL OUTPUTS
SRC C420 offers two outputs, balanced and
coaxial. The data format (professional or con-
sumer) is identical on both outputs, regardless
of their physical or electrical standard. The
outputs are situated on the rear panel.
- The balanced output is equipped with an
XLR type connector, transformer balan-
ced, impedance 110 ohms according to
AES 3/11 standard.
Output voltage is > 4 Vss.
- The coaxial output is equipped with a
Cinch connector, unbalanced, impedance
75 ohms, according to IEC 958.
As the output voltage is 1 Vss, it also suits
for AES-id applications.
THE OPERATION THE OPERATION
THE DIGITAL OUTPUT FORMAT
The digital output format (professional or con-
sumer) is selected by the "FORMAT" button.
The frequency information entries are proces-
sed correctly in professional mode. In consu-
mer mode the entries are processed as far as
possible (Fs > 48 kHz is not provided in consu-
mer mode).
HINT:
In consumer mode, SCMS information (copy
protection) is handled as follows:
- Byte 0, Bit 2 = 1 = copy permitted /
copyright not asserted.
- Byte 1, Bit 7 = 0 = original / pre-recorded
data.
13