Mbps Wireless Pci Adapter Installation; Prepare For Installation - U.S. Robotics 2216 Installationsanleitung

22 Mbps Wireless PCI Adapter Installation

Package Contents:
• 22 Mbps Wireless PCI Adapter
• Quick Installation Guide
• one (1) detachable antenna
• Installation CD-ROM
Note: You can also refer to the User Guide on the included Installation CD-ROM for more
detailed information. For the most updated information, visit:
http://www.usr.com/support

Prepare for installation

Note: Your product number is 2216. It is very important that you have your serial number
written down before you install the 22 Mbps Wireless PCI Adapter. You can find your serial
number on the label of the 22 Mbps Wireless PCI Adapter and on the side of the package.
If you ever need to contact our Technical Support department, you will need this number to
receive assistance.
Note: Be sure to find out what letter your CD-ROM drive uses before you begin installing
your new product. You will need to know this to properly install your software.
Note: During the Installation procedure, you may be prompted for your Windows
Operating System CD-ROM. Make sure you have that available in case you need it.
Step 1. Install your software and drivers*
Turn on your computer. Insert the Installation CD into your CD-ROM drive.
Note:
If the Choose Setup Language window appears, select your preferred language and
click OK. If your CD-ROM does not automatically launch, click Windows Start, Run, type
D:\setup (or the appropriate letter of your CD-ROM drive), and click OK.
Read the License Agreement and click Yes to accept the terms. If you do not accept the terms of
the agreement, click No and the software installation will be terminated.
Note:
You will need to install this Installation CD-ROM on all the PCs you plan to wirelessly
network together.
1