Technical Requirements; Initial Operation - auna 10006514 Schnellanleitung

ucts. Instead, use a soft, dry cloth or soft brush.
• This appliance is to be used with 12V car power supply.
• Save these instructions.
Small objects: Keep small objects (i.e. screws, mounting material, memory cards etc.) and packaging out of
the range of children. Do not let Children play with foil. Choking hazard!
Transporting the device: Please keep the original packaging. To gain sufficient protection of the device
while shipment or transportation, make sure to put it back in its original packaging.
Cleaning the surface: Do not use any volatile liquids, detergents or the like. Use a clean dry cloth.
Your microphone comes with a USB connector. The audio signal is sent from the microphone to the com-
puter through this connection. At the same time the computer uses the USB connection to supply the mi-
crophone with the necessary power. A connection is made by using the included USB cable with type-B
connector.
NOTE: Use only the included cable to ensure an optimal signal quality and a reliable power supply. To oper-
ate the microphone, your computer needs to meet the following system requirements:
Windows PC
Intel or AMD CPU, 1GHz or higher
minimum 512MB RAM
USB 2.0 interface
Windows XP/Vista
Before you can use your microphone, connect it to a free USB port on your computer. For initial operation
of your microphone, complete the following steps:
• Power up your computer.
• Connect your microphone to a free USB port on your computer
NOTE: Your operating system automatically installs the required drivers.
• Select the microphone as input source in your preferred audio software application.
Windows:
• Adjust the recording level as required, using the Windows Volume Control panel. (Shortcut: Loud-
speaker icon found in the taskbar)

Technical requirements

Initial Operation

G4/G5, 800MHz or higher
minimum 512MB RAM
USB 2.0 interface
Mac OS X 10.3.9 (Panther) or higher
Mac
7