Lenz Digital Plus XpressNet Phone Adapter Betriebsanleitung Seite 35

9 Audio signals
After answering the phone you can hear the following signals:
Audio sequence:
Engaged tone:
Short deep tone:
You can alter a locomotive or point address or the device
settings.
You cannot send commands to the command station. The
cause is probably a wrong XpressNet connection or the
device is not addressed by the command station. Check
whether the set XpressNet address is used by the command
station.
An entry (command) cannot be made. Cause: the chosen
action cannot be carried out with the command station used.
Example: You would like to select a 4-digit locomotive
address at the "compact".
35