Fermax DUOX Installationshandbuch Seite 46

DETECTING G.E. GUARD UNITS (IM)
This function allows you to detect the existence of guard units configured as GENERAL
ENTRANCE GUARD UNIT within the installation, along with their number.
For this, follow these steps indicated in the diagram:
1. DETECTOR
GENERAL GUARD U.
GUARD UNNIT
ALL GUARD UNITS
No guard units have
been detected
TEST RESULT:
NO GUARD UNITS
ESC
Exit this function and return to the GUARD UNIT DETECTION menu
We start from the GENERAL ENTRANCE GUARD UNIT
DETECTION option on the GUARD UNIT DETECTION menu:
OK
Start testing the 10 possible guard unit numbers that may exist
as general entrance.
00 The digits display the panel number being tested.
After having completed the scan, you can present one of these 3
results:
All 10 guard units
have been
detected
TEST RESULT:
TEST RESULT: ?
TEST RESULT: ?
Only some guard units have been detected.
Choose if you want to view the detected or
undetected ones.
OK
DETECTED
OK
NO DETECTED
GUARD UNIT OK:
07
GUARD UNIT NOK:
04
The guard units
detected are
displayed
The guard units
NOT detected
are displayed