LGB 55024 Bedienungsanleitung Seite 5

The LGB 55024 single-channel switch decoder features the following CVs:
Register Function
CV1 Switch decoder address
CV2 Programming protection (input "77" to allow one-time
programming of a single CV)
CV3 Switch setting direction ("0": normal; "1": inverse)
CV7 Input "55" to reset loco address (CV1 and CV9) to "1"
During read-out: software version
CV8 Manufacturer code, read only
CV9 Switch decoder address Byte 2 (address x 256)
For addresses above 255, byte 1 is programmed in CV1
and byte 2 in CV9: Address = CV9 x 256 + CV 1.
(Not for LGB MTS)
No other functions can be pro-
grammed. For advanced applica-
tions, we recommend the LGB 55025
MTS Switch Decoder.
AUTHORIZED SERVICE
Improper service will void your warranty.
For quality service, contact your author-
ized retailer or one of the following LGB
factory service stations:
Gebr. Märklin & Cie. GmbH
LGB Service-Abteilung
Witschelstraße 104
90431 Nürnberg
Deutschland
Telephone: +49 (911) 83707-38
Telefax: +49 (911) 83707 818
CAUTION! This model is not for children
under 8 years of age. This model has
small parts, sharp parts and moving
parts. Save the supplied packaging and
instructions.
Products, specifications and avail-
ability dates are subject to change
without notice. Some products are
not available in all markets and at all
retailers. Some products shown are
pre-production prototypes. LGB,
Märklin logotype Gebr. Märklin & Cie.
GmbH. Other trademarks are the
property of
© Gebr. Märklin & Cie. GmbH
Available Factory
values pre-set
(1-255) [1]
(0-1) [0]
[123]
(0-7) [0]
their owners.
7