Technical Data - MDS IsoForceControl EVO2 Bedienungsanleitung

Technical Data

Device
CPU:
Measuring Method:
Display:
Power Supply:
Power Consumption:
Dimensions:
Weight:
Measurement
Measuring rate:
Average value determination:
Measurement unit:
Range:
Resolution:
Accuracy:
Starting threshold measuring cycle:
Duration of one measuring cycle:
Timeout:
Languages:
Test Report:
Issue 2 English 01/2017
Dokumentation © 2017 MDS Herkules Kunststoff Oberburg AG, CH 3414 Oberburg · Switzerland
All rights reserved. This manual may not be reproduced in any format, either in whole or in part, nor may it be
duplicated or edited by electronic, mechanical or chemical means, without the written consent of the publisher.
Typographical and printing errors cannot be excluded. However, the information contained in this manual is
reviewed on a regular basis and any necessary corrections will be implemented in the next edition. We accept no
liability for technical or typographical errors or the consequences thereof. All trademarks and industrial property
rights are acknowledged.
Printed in Switzerland.
Changes may be made without prior notice as a result of technical advances.
V1.3
6
Microcontroller STM32F 103
DMS Full Bridge
TFT 2.4", 320x240 Pixel, 16Bit Color
4 x 1.5 Volt Batteries Mignon (AA/LR6/HR6)
or USB connection 4.5V-5.5V / 500mA
500 mW
203.2x98.0x34.8mm (LxWxH)
1 kg
33 measurements / second
arithmetic
N / kg / lbf
10-400 N / 1-40 kg / 1-90 lbf
0.1 N / 0.1kg /0.1 lbf
≤ 3% FS
10 N / 1 kg / 1 lbf
3 - 20 Seconds
10-120 s
German, English, French, Italian.
IEC / EN 61326-1