Dynamic Perception MX3 Benutzerhandbuch Seite 3

Inhaltsverzeichnis
1. Specifications 2. Overview
3. Basic Operation
3.1. Powering the MX3 3.1.1. DC Input Jack
3.1.2. MoCoBus Connector 3.1.3. USB Connector
3.2. Buttons
3.2 Control Screens 3.4 Accessing Menus
4. Main Control Screens 4.1. Program Control 4.2. Camera Control 4.3. Motor Control
5. Main System Menu 6. Camera Control
6.1. Connecting the Camera
6.2. Introduction to the MX3 Camera Cycle 6.3. Controlling Exposure on the Camera 6.4.
Controlling Exposure on the MX3
6.5. Controlling Focus, Waking Camera up from Sleep 6.6. Multiple Exposures
6.7. Focus Lock with Shutter 6.8. Limiting Total Shots
6.9. Start Timer
6.10. Full Manual Camera Control 7. Motion Control
7.1. Configuring Motor Axes
7.1.1. Configure Axis Using Presets 7.1.2. Configure Axis Manually
7.2. Choosing Your Motion Mode 7.3. Continuous Motion
7.4. Shoot-Move-Shoot Motion 7.5. Lead-In and Out
7.6. Linear Ramping
7.6.1. Symmetric Ramping 7.6.2. Asymmetric Ramping
7.7. Manual Motor Control
7.8. Swapping Directions 8. Warnings and Alarms
8.1. Input Voltage Alarm 8.2. Motor Current Alarm
8.3. Motor Temperature Alarm 9. Auxiliary Inputs and Outputs
9.1. Auxiliary I/O Technical Details 9.2. Input Program Actions
9.2.1. Changing the Input Trigger Type 9.3. Output Program Actions
9.3.1. Output Before Exposure 9.3.2. Out After Exposure
9.3.3. Changing the Output Level 9.4. Common Use-Cases
9.4.1. Limit Switches
9.4.2. External Intervalometer 9.4.3. "Chasing the Shutter"
10. Cold Weather Modification 11. System Settings
11.1. Metric Display
11.1. LCD Backlight Auto-Off 11.2. Reset to Factory Defaults 11.3. Motor Timing
11.4 . Speichern/Laden von Speicher 12. Updating Firmware
13. Trouble Shooting Appendix A: Menu Tree
Appendix B: List of Supported Cameras