Installation - TREEPOD STAND Bedienungsanleitung

7. Lay the ring with webbing on the
7
ground in the center of the Stand and
roll the webbing out to each leg.
8. Lift each leg and place the sewn loop of the webbing around the legs at ground level and into
the guide channels.
WARNING - DO NOT REMOVE WEBBING. WEBBING MUST BE ATTACHED TO ALL LEGS AT
ALL TIMES. REMOVAL OF THE WEBBING WILL AFFECT THE INTEGRITY OF THE STAND AND
ITS STABILITY AND WILL VOID THE WARRANTY. DO NOT USE PRODUCT IF WEBBING IS
DAMAGED OR HAS BEEN REMOVED.
8

INSTALLATION

1. Read fully and follow directions in the TreePod manual to assemble.
2. Attach the Quick Link included in
2
the TreePod package to the sewn loop
on top of the TreePod and the welded
ring at the top of the Stand. Screw in
the Quick Link gate completely so it is
secure.
TREEPOD STAND INSTRUCTION MANUAL - ENGLISH