Independence X-Pro Betriebsanleitung Seite 12

Placing in deployment bag option b)
3b. Fold the canopy in big, horizontal S-folds (stack
pack). Bundle the lines in 3x3 "8-folds". Do not bundle the
last 60 cm of lines.
Both options are technically equivalent and can alternatively be used.
Attention: new rubber bands must be used for line bundles and container with every re-pack!
4. Close the deployment bag with the lines. First the
right flap with the upper and lower flap.
Depending of the rescue system size the inner or outer
grommets can be used to adjust the deployment bag
volume.
12
Placing in deployment bag option a)
3a. Fold the canopy in small S-folds and place it in the
deployment bag. Bundle the lines in 3x3 "8-folds". Do not
bundle the last 60 cm of lines.
5. Close the left flap. Also here you can adjust the
deployment bag volume by using the inner or outer
grommets.
First close the middle, then the outside!