Programming Cup Capacity - Twiins K-fee Betriebsanleitung

Programming cup capacity

setting range
Buttons
[ml]
30 - 100
80 - 200
100 - 240
65 - 130
Switch the appliance on and place the
1
required cup under the spout.
Open the lever and insert the required
2
capsule. Now close the lever completely
again.
2
PROHIBITED Do not reach
inside – injury hazard.
18
Now press the button for the required
3
cup size for at least 3 seconds to activa-
factory setting
te programming. Release the button. The
[ml]
cup will now be filled up with the drink.
Stop the brewing process by pressing the
45
button again once the required capacity
has been reached. This new setting will
105 be saved automatically.
200
3
65
min. 3 sec.
Stop
WARNING Very hot water –
scalding hazard.
NOTE It is possible to reset
the appliance to the factory
settings (see P. 29).