Table of content
GB
1. Casing base
2. Bolts/screws
3. Grille
4. Motor with impeller
5. Screw holes
6. Terminal box
Dimensions (mm)
AirFlow a
200 312 260 208 120 260
250 370 320 262 140 320
315 430 380 312 170 380
Screw holes:
200 / 250:
315:
86
b
c
d
e
Ø 7 mm
Ø 9 mm
1
Before installation
Shut down the automatic circuit
breaker. Make sure that is shut off
in all poles.
2
Installation
The casing base is equipped with 4
mounting holes.
Make sure that the arrow on the
casing matches the required air flow
direction.
Make sure there is enough space for
maintenance, servicing or replace-
ment operations.
Install the fan under shelter or a
roof, to avoid water ingress inside
the fan casing.
1. Mark the position of the mount-
ing holes on the wall.
2. Drill the holes and fit the plugs.
3. Install the device with the screws.