HP Officejet Pro 6230 ePrinter series Anleitung Seite 3

Paper Size Selection button and lights
8.5x11 in/A4
8.5x14 in
4x6 in
10 x15cm
Before you print, make sure you select the paper size setting that matches the size of the paper in your input tray.
Use the Paper Size Selection button on the printer control panel to select standard paper sizes. Press the button to
toggle through the three standard sizes indicated by the lights and select the desired size.
Use the HP printer software or the embedded web server (EWS) to select settings not available on the printer control
panel. For information on how to open the EWS, see "To open the embedded web server" on page 5.
Selection lights
One light is on
One light is blinking
All lights are blinking
Each light blinks in sequence
If you pull out the input tray when there is a paper error, there will be no change to the way the paper size selection
lights are lit.
For information about other lights, see the "Control panel lights reference" section in the electronic Help (see "Learn
more" on page 1).
What to do
The paper size selection light that is lit indicates the current paper size
setting selected.
button to select the size of the paper loaded.
The current paper size selection light blinks when you pull out the input
tray.
The light stops blinking when you close the input tray or press the
selection button once.
button to select the size of the paper loaded.
This occurs when you select a paper size from a software application or
EWS that is not one of the sizes on the printer control panel.
Be sure to load paper that matches the paper settings you have selected,
and then close the input tray properly.
This occurs when you pull out the input tray after selecting a paper size
from a software application or EWS that is not one of the sizes on the
printer control panel.
The lights will stop blinking when you close the input tray or press the
selection button once.
If you are loading paper of a size that is available on the control panel,
use the selection button to select the size of the paper loaded. Otherwise,
load paper that matches the paper settings you have selected, and then
close the input tray properly.
When you connect your mobile device to your printer, the paper size
correct printer.
If you press the selection button once, the lights will stop blinking.