Seite 6
1.3.1. Peer-to-Peer-Mode 1.3.2. Master-Slave-Mode 1.4. Anschlüsse, Anzeigen, Bedienelemente Wenn Sie die TV-Buchse nicht verwenden, schließen Sie diese mit dem beiliegenden Abschlusswiderstand CFA 8-00 ab!
Seite 7
1.5. Anwendungsbeispiele 1.5.1. IP-Daten-Einspeisung in einer SAT-ZF-Verteilstruktur: Wenn der terrestrische Eingang des SAT- Multischalters nicht belegt ist, muss er mit einem 75 Ohm Abschluss- widerstand abgeschlossen werden. rückkanaltaugliche Antennendose rückkanaltauglichen terrestrischen Eingang...
Seite 8
1.5.2. IP-Daten-Einspeisung in eine CATV -Verteilstruktur: rückkanaltaugliche Antennendose...
Seite 9
1.5.3. IP-Daten-Einspeisung in eine Kopfstelle:...
Seite 10
2. Installation und Inbetriebnahme Hinweise: ∂ ∂...
Seite 21
1.3. Field of application 1.3.1. Peer-to-Peer mode...
Seite 22
1.3.2. Master/Slave mode 1.4. Connections, indications, operating elements If the TV F socket ist not used, the socket has to be terminated with an termination resistor CFA 8-00!
Seite 23
1.5. Application examples Feeding in of IP data in a SAT-IF distribution structure: If the terrestrial input of the SAT multiswitch is not assigned, it must be terminated with a 75 Ohm terminating resistor. return channel capable antenna socket return channel capable terrestrial input of the multiswitch...
Seite 24
Feeding in of IP data in a CATV distribution structure: the return channel capable antenna socket. via the EoC combiner TZU 40-03 Feed in of IP data in a headend system:...