Attach the XSi hardware with the supplied null modem cable to a
•
serial interface on your computer.
Start a serial terminal program (Windows: e.g., PuTTY or
•
SecureCRT. Unix: e.g., tip, cu, minicom or kermit).
Use the default connection settings:
•
115200 Baud
•
8 bit
•
No parity
•
1 stop bit
•
Hardware Flow Control
•
For further information regarding the installation, please use the
•
manuals on our website:
https://www.genua.de/en/support/downloads/manuals.html
Please note when reinstalling the software which version is
•
supported by the hardware:
https://www.genua.de/support/downloads/hardwareinformation
14