KONIFERA Alida Aufbauanleitung Seite 259

LED-coloured light „Premium"
Delivery contents:
- LED-lamp
incl. wooden frame
- Power supply
- Mains lead
- LED-controller
- Remote control
- Locking screws
Technical details:
Input power supply: AC 100-240 V~
General safety regulations:
- All electrical installations may only be carried out by an authorized electrician.
- Pay attention to the operating instructions.
- Keep away children from the LED-coloured light.
- Disconnect the main power plug before cleaning the device.
- LED-controller and power supply have to be installed outside of the sauna or infrared cabin.
- The coloured light is able to bear temperatures up to 100 °C.
Installation Sion A-series (overhead installation):
- Place the LED-coloured light at the desired spot and mark the
corners of the LED-coloured light with a pen (fig 4).
- Mark the position of the drilling for the mains lead in the
middle of the colour light, 40 mm away from the lateral edge
(fig 5).
- Drill a hole (Ø at least 20 mm) through the roof of the sauna or
infrared cabin (fig 5).
- Attach the LED-coloured light with the enclosed screws to the
ceiling.
Electrical connection:
- Connect the LED-coloured light to the LED-controller first and
to the power supply afterwards.
Operating instructions
Overhead
installation:
Dimensions:
50-60 Hz Output: DC 12 V; 5 A
LED Art. No.:
Premium 66569
320 x 240 x 38 mm
fig. 4 fig. 5
prepared on: 01.02.2017