Knauer HPLC Bedienungsanleitung Seite 14

Process and figure
1. Mount the air sensor
the pump head.
2. Remove the cap of the air sensor and wipe the
measuring channel with a lint-free cloth.
3. Clamp the hose
The inlet
the bottom, the outlet
Fig. 1 Hose in the air sensor
Next steps
Bring the air sensor into service.
3
into the measuring channel.
1
into the sensor channel is found on
4
Air Sensor Supplement V6876, version 1.0
Installation
straight or angularly near
on the top.
2
15
1
2
3
4
EN