Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
<4-5>
Overheat from original Temperature Detection Setting
Original detection set at 50.0 (122.0 ), if temperature
detected overheats the original setting. Screen using
will display the following
Remark: Buzzer and alarm symbol are disabled by pressing any buttons located at the front panel.
Back Panel Description
5.
HDD ACCESS
4
•
HDD access and Fan signals are
displayed.
•
Temperature and alarm buzzer
signals will continuously flash.
FAN FAIL
TEMP FAIL
POWER LED
Master/Slave
4 PIN
<4-6>
Fan Fail Alarm
If the fan fails or is disconnected, the LCD displays the following
SATA
•
HDD access signal is displayed.
•
Fan and alarm buzzer signals
will continuously flash.
Werbung
Inhaltsverzeichnis
