Icy Dock MB672SKGF Handbuch Seite 4

<4-2> Temperature Detection and
A. From Main Display, press "SET" button to enter Temperature
B. After confirming the
C. If setting temperature at 55.0 (131.0 ), the LCD will display the following:
Remark: If LCD screen does not return to Main Display, stop operation for 15 seconds, the LCD will then
automatically return to the Main Display and the original tempera ture detection setting will be cancelled.
<4-3> HUTR Display
To enter the HUTR mode, the Hour signal is displayed as below:
Settings:
mode, enter Temperature detection Setting mode.The LCD screen flashes the following:
•
Default setting: 50.0 (122.0 ).
•
Press "▲" to set the temperture to 55.0 . Press and hold the "SET" button for more
than 3 seconds, and the alarm buzzer will sound "BEEP" twice as choice confirmed.
If sound "BEEP" is less than twice, it is not a confirmed choice.
day hr
SettinMod and display the following:
•
Press "▲" button or " ▼" button to switch the
•
Press "SET" button to confirm your choice.
<4-4> HDD Access Display
If HDD is reading or writing, HDD access signal displays the below:
English
3