Shooting Photos - Segula KuliCam Gebrauchsanweisung

operAting

5. SHooTiNG pHoToS

if the camera is ready to be operated, the status light will be blue illuminated
(Standby). Single press the oN/oFF button to shoot a photo. The status light
will flash yellow. After that, the device will save the current image. afterwards
the status light will be blue illuminated again. in order to shoot more photos,
repeat the previous mentioned procedure.
please notice:
A. if the device is not used for a short period, it will turn off automatically in order
to save power.
B. Before the battery runs out of power, the device will automatically save the
current file and turn off.
C. The system will create a new file after stopping the recording.
D. it takes a few seconds to save the file, don't operate the device until the light
turns yellow. it can lead to the corrupt files if you do.
E. Make sure there is adequate light in the surrounding and the camera is not
blocked by other items. Keep the camera upright and stable. And the object
should be more than 50cm from the camera.
21