Operating; Start Recording; Stop Recording - Segula KuliCam Gebrauchsanweisung

operAting

1. powER-oN
in order to turn on the camera, press the on/oFF button for 5 seconds. wait
until the status light is glowing constantly yellow. The camera is now ready
to use.

2. START RECoRDiNG

The LED will automatically turn to blue and it is video recording.

3. STop RECoRDiNG

press the on/oFF button again to stop recording. Now The device will save
the footage. The status light will turn yellow again (Standby).
please notice:
once activated, the Device will need a short period of time to boot up. Do
not press the on/oFF button during that procedure. The time to boot up the
system depends on the storage size of the device. The more storage the device
has, the more time the boot up procedure will take. in order to ensure good
sound effect of recording, do not block the microphone hole.
19