IFM Electronic SmartLink DP AC1375 Montageanleitung Seite 14

O Diagnostics
O Master setup (AS-i master flags)
O Slave Info
O Fieldbus setup (Setting of the fieldbus interface)
14
∇ (Diagnosis of the AS-i network and the slave
communication)
∇ Reading of the current AS-i configuration (config
all)
∇ Changeover to the projection mode: configuration
of the AS-i system
∇ Changeover to the protected mode: standard
mode (the master monitors the configuration)
∇ Deactivation of the automatic AS-i slave addres-
sing in the protected mode
∇ Deactivation of the AS-i reset when exiting the
projection mode
∇ Display of the config error counter of the connected
AS-i system
∇ Reset of the config error counter
∇ Display of the fault rate percentage of the
connected AS-i system
(Detailed information about the connected AS-i slaves)
∇ Digital or analogue inputs/outputs of the connec-
ted AS-i slaves
∇ Current and projected parameters of the connec
ted AS-i slaves
∇ Current and projected I/O and I/D codes of the
connected AS-i slaves
∇ Message faults in the communication to the
connected AS-i slaves
∇ Input of the slave address of the gateway in the
higher-level Profibus DP
∇ Further information about the higher-level Profi-
bus DP