Connection To Power Supply Mains - SPM SUPERCOLD 12 LT Bedienungsanleitung

16

4 - CONNECTION TO POWER SUPPLY MAINS

For your personal safety, before inserting the plug into
the electrical outlet carefully read the following pre-
cautions.
- The electrical safety of Supercold can only be achieved if
the machine is properly connected to an efficient ground-
ing system, in compliance with current national safety
standards. Therefore, the manufacturer cannot be held
responsible for damage and/or injury caused by failure to
properly ground the machine.
- For a safe and correct installation, it is necessary to pro-
vide for a special outlet, with contacts having an open dis-
tance equal to or greater than 3 mm, controlled by an uni-
polar circuit breaker, conforming to current national secu-
rity standards.
- The power supply cable must not, in any way, for its entire
length, be compressed, extension cords may not be used,
and finally, the plug must be removed from the outlet with
a slight pulling movement, after having first cut-off the
power supply.
- Do not obstruct the ventilating grill and heat dispersion
grill, since an insufficient ventilation may not only reduce
the efficiency of the machine, causing it to function inad-
equately, but may also cause serious damage to the ma-
chine.