Important Warnings And Suggestions; Useful Instructions For Transport; Installation - SPM SUPERCOLD 12 LT Bedienungsanleitung

1 - IMPORTANT WARNINGS AND SUGGESTIONS

The present instruction manual is an important part of
the Supercold and must be kept for any future
consultation.
Carefully read the warnings contained in this instruc-
tion manual before installing and operating the
Supercold.
Besides providing information on routine maintenance
of the Supercold and aiding the technical assistants in
the detection and repair of possible malfunctions, the
objective of this manual is to take advantage of the
maximum potentials of the Supercold in order to adapt
the machine to the specific needs of the various coun-
tries where it will be used.
Modification of, or any attempt to modify this machine,
is extremely dangerous and will cancel any form of
warranty.
All maintenance procedures must be performed by
expertly qualified personnel.
The attempt to repair the machine by unqualified per-
sons is dangerous and may cause serious damage to
the machine.

2 - USEFUL INSTRUCTIONS FOR TRANSPORT

In order to prevent the oil contained in the compressor from
flowing into the cooling circuit, it is necessary to always carry,
store and handle the Supercold in a vertical position,
following the instructions found on the packaging.
a) Remove the packing material from the machine, then slide
it off from the top.
b) Positioning the machine
- the main body of the machine must be well ventilated.
Installation of the machine near a heat source should
be avoided. A room temperature between 15 °C and
25 °C is suggested.

3 - INSTALLATION

15