Q-tag 2 plus Bedienungsanleitung Seite 14

Q-tag ® plus
The next push to START shows the recorded mean temperature of the currently blinking time segment, accom-
panied by both flashing indicators «max» and «min».
All following segments can be read in the same way by subsequent pushes to the START button.
Important: no mean value is available for the last time segment.
Alarm details (History-Mode)
If alarms have been recorded, they will be indicated by arrows inside the segment circle. The alarm details are
also visible in the «History-Mode». Firstly, also in a segment with alarms, the extreme and mean temperatu-
res are displayed as formerly described by repeatedly pressing the START button (maximum «max», mini-
mum «min» and mean value «max» + «min»).
But then the centre display changes from temperature to time and the «ALARM» sign is lit with the fourth
push to the START button. The time display is easily identifiable by its colon. It shows the exact elapsed time
between the start of the measurements and the alarm event. A triangle in the left display region indicates the
alarm type as printed on the label.
History-Mode: min. temperature
of the first time-segment
History-Mode: exact alarm
occurrence time in the second segment
14