Herunterladen Diese Seite drucken

Bullerjan Free Flow KERAMIK Montageanleitung Seite 5

Werbung

D:
Schrauben Sie die Halterung so an, dass diese ein „U" bildet und die breite,
horizontale Schiene vom Ofen weg zeigt. Beachten Sie, dass die beiden Knöpfe auf
der Schiene nach oben zeigen müssen. Dadurch wird sichergestellt, dass die
Keramik auf der Schiene einrastet.
GB:
Screw the bracket in that way that it forms an "U" and the broad, horizontal track
is showing away from the stove. Note that the two buttons need to show on the
line up. This ensures that the ceramic locks onto the track.
F:
Vissez la fixation de manière à former un "U" et que la barre large et horizontale
soit loin du poêle. Notez que les deux boutons sur la barre doivent être tournés
vers le haut . Cela garantit que la céramique s'enclenche dans la barre.
D:
Dieses Verfahren lässt sich auf die linke Ofenseite übertragen.
GB:
Please proceed according to this for the left side of the stove
F:
S'il vous plaît procéder de la même façon également pour le côté gauche du poêle.
Montageanleitung KERAMIK 03/2015
Seite 5 von 8

Werbung

loading