Cleaning And Maintenance; Removing Mineral Deposits - Afk KME-900.10T Bedienungsanleitung

above 1-5 steps again.
When the time is due the indicator of AUTO will go out,
while the indicator of RUN turn on and the unit starts brewing.
The appliance will be cut off power automatically after 40 mins
if it has not been manually disconnected at the compl
etion of brewing.

CLEANING AND MAINTENANCE

CAUTION: Be sure to unplug this appliance before cleaning.
To protect against electrical shock, do not immerse cord, plug
or unit in water or liquid. After each use, always make sure
plug is first removed from wall outlet.
1) Clean all detachable parts after each use in hot, sudsy water.
2) Wipe the product's exterior surface with a soft, damp cloth
to remove stains.
3) Water droplets may buildup in the area above the funnel
and drip onto the product base during brewing. To control
the dripping, wipe off the area with a clean, dry cloth after
each use of the product.
4) Use a damp cloth to gently wipe the warming plate. Never
use abrasive cleaner to clean it.

REMOVING MINERAL DEPOSITS

To keep your coffee maker operating efficiently, you should
clean away the mineral deposits left by the water regularly
according to the water quality in your area and the frequency
use the appliance, the detail is as follows:
1. Fill the water tank with water and descaler to the MAX level
in the gauge of coffee maker (the scale of water and
descaler is 4:1, the detail refers to the instruction of descaler.
Please use "household descaler", you can use the citric acid
instead of the descaler (the one hundred parts of water and
three parts of citric acid).
2. Push carafe on warming plate, pay attention to let center