Before The First Use; Using Your Coffee Maker - Afk KME-900.10T Bedienungsanleitung

BEFORE THE FIRST USE

Check that all accessories are complete and the unit is not
damaged. Add water into water tank to the max level and brew
water for several times without coffee powder, then discard the
water. Clean all detachable parts thoroughly with warm water.

USING YOUR COFFEE MAKER

1. Open the water tank lid and fill the water tank with cold
drinking water. The water level should not exceed MAX
level as indicated on water gauge.
2. Open the lid, put the funnel into funnel holder, then place
the filter paper in the funnel, and make sure it is assembled
correctly.
3. Add proper coffee powder into filter. Usually a cup of coffee
need a level spoon of coffee powder, but you may adjust
according to personal taste, and then close the Lid
4. Insert the carafe on warming plate horizontally.
5. Plug the power cord into the outlet. The LCD will display
"12:00" and the colon will flash, but all the button lights will
not illuminate.
6. Press ON/OFF button, the indicator of RUN will be
illuminated red. The appliance will begin working.
7. The brewing process can be interrupted by pressing the
ON/OFF button twice again at any time, and the indicator
of RUN will be extinguished. The appliance will continue
brewing once ON/OFF is pressed again.
Note: You can take out carafe, pour and serve at any time.
The appliance will stop dripping automatically. But the time
cannot exceed 30 seconds.
8. Remove out carafe to serve when finish brewing (about one
minute later after the coffee stops dripping out.)
9. When the process is finished, if you do not want to serve