iCES IFS-300 Bedienungsanleitung Seite 4

FOOD CARRIAGE: Slide food pusher off and lift food carriage from platform.
PLATFORM
STAINLESS BLADE : Unplug slicer. Turn blade lock counter clockwise and lift out carefully. To
NON-SLIP FEET
cleaner.
Fig.3
STORAGE
1. Align thickness guide with blade.
2. Fold up platform . Wrap cord in storage area on bottom of slicer. (fig. 4)
USE YOUR FOOD SLICER
FOR BEST RESULT
 To slice meats wafer thin, chill thoroughly before slicing.
 Meats should be boneless. Fruits should be free of seeds.
 Foods with an uneven texture - like fish and thin steaks - are often difficult to slice. Partially freeze
before slicing.
 At canning time, use the slicer to quickly cut cucumbers and onions for attractive pickles... apples for
pies... vegetables for the freezer.
HOT ROASTS: Beef、Pork、Lamb、Turkey、Ham
When slicing warm boneless roasts, remove from over and let set 15 to 20 minutes before slicing. They
will retain more natural juices and slice evenly without crumbling. Cut the roast, if necessary, to fit on
food tray. If roast is tied, turn off motor and remove strings one at a time as strings near blade.
Extra-Thin Sliced Corned Beef or Fresh Beef Brisket
Chill cooked brisket over night in cooking liquid. Before slicing , drain and reserve meat drippings
from brisket. Pat dry with paper towels. Remove excess fat. Slice well-chilled brisket to desired thickness.
To serve hot , place slices on heatproof platter and moisten with small amount of reserved meat drippings.
Heat in 300℉ oven for 30 minutes.
: Fold up platform. Push the hinge handle to left and pull out the platform from base.
replace. Align both tabs of blade lock with slots of motor housing and
turn clockwise to secure.
Be sure gears engage. (fig. 3)
Note: Always align thickness guide with blade for safety and blade
protection during storage.
: Clean with any grease-removing cleanser, such as alcohol or window
fig.4
EN-3