Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
!"#*%')#(@#'(&*%
%
7. Cleaning and care on Welltherm infrared panel heaters
A frequent cleaning of the panel heater will ensure faultless operation and a long lifetime circuit of your infrared panel heater. Please switch off the
heater and cool it down to room temperature before you clean the surface. For cleaning use a wet cleaning cloth or glass cleaner. Don't use any
abrasive powder cleaner or furniture polish for this will damage the surface.
8. Terms of guarantee
We will offer you a 60 month guarantee beginning with the date of the invoice or shipping note.
Within this period we will regulate all faults caused by material or production by repair or refund of the defect parts.
The guarantee will only be accepted when the heating panel was properly treated.
Additional claims are explicitely excluded!
The guarantee will only include the repair/refund of the infrared heating panel.
We will not assume liability for damages caused by kicks, wrong handling, humidity or by external treatment.
Clicking noises caused by thermal expansion or by wall unevenness are no reason for complaints and will not impact the heating function.
Optical distortions on the sides of the mirror heating elements are technical caused and no reason for complaint.
In case of guarantee the infrared heating element has to be sent to our head office.
As an attachment you have to add the invoice or the shipping note and a detailed description of the defect and to use a suitable package.
Welltherm GmbH, Wibschla 22, DE-58513 Lüdenscheid
Telefon:
+49 2351 981 622 60
Email:
info@welltherm-gmbh.de
9. Installation
Please find the optimal place of installation before you start to mount the Welltherm infrared panel heater.
Ensure that nothing will disable the function of the infrared waves and that all safety distances comply with our guidelines (look chapter "safety
advice").
The Welltherm infrared heaters will only heat up solid materials which will also reflect the heat back to other solid materials.
It is recommended to mount the infrared panel in a way that it will directly ray on the persons.
Please find the additional advices in the text before.
After having chosen the area for mounting you have to start the mounting process as described below.
Step
1:
Deposit the packed Welltherm panel on the floor so that the label is on the upper side of the carton. Now open the cover plate carefully.
Lift the infrared heater on the side and take the drilling template out (it is under the panel). To reduce the danger of damages please open
the heater package in the room where you intend to install the heater.
Note that an exact positioning of the screws is the basic for the simple and trouble-free assembly.
Important:
The drilling template has 5 drills for marking. Depending on the orientation of the heating element the upper drills are relevant for wall
mounting. The central drills are the markings for the optional ceiling mount holders.
For marking the holes the drilling template is provided with cuttings.
GB
Fax:
+49 2351 981 622 66
Web:
www.welltherm-gmbh.de
%
+,-.,/%012+03452613789#%"#$%:%;8//<=8>?%
&"%
Werbung
Inhaltsverzeichnis
