Maintenance Schedule; Troubleshooting - HERKULES HSE3500 Originalanleitung

Maintenance schedule

Please adhere to the following maintenance periods in order to ensure a failure-free operation.
IMPORTANT! The equipment must be filled with engine oil and fuel before it is started.
Before each
use
Checking the engine
oil
Changing the engine
oil
Checking the air filter
Cleaning the air filter
Cleaning the petrol
filter
Visual inspection of
the equipment
Cleaning the
spark plug
Checking and
readjusting the throttle
vale on the carburetor
Cleaning the cylinder
head
Set the valve play
Important: The positions marked with "x*" should only be carried out by an authorized dealer.

11. Troubleshooting

Repairs
Only use manufacturer's recommended accessories and replacement parts. If the unit should fail despite our quality controls and
your maintenance, only allow an authorised electrician to carry out repairs
Fault Possible cause
Automatic oil cut-out has not
responded
Engine does not
start Spark plug fouled
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
Generator has too
triggered
little or no voltage
Air filter dirty
After an
operating
period of 20
hours
X
For the first time,
then every 50
hours
X
X
Remedy
Check oil level, top up engine oil
Clean or replace spark plug (electrode spacing 0.6 mm)
Refuel / have the petrol cock checked
Contact your dealer
Actuate the circuit-breaker and reduce the consumers
Clean or replace the filter
After an After an
operating operating
period of 50 period of 100
hours hours
X
X
X
Distance: 0.6
mm, replace if
necessary
GB
After an
operating
period of 300
hours
Change the
filter insert if
necessary
X*
X*
X*
21 І 96