patura SP 12/15/36 Bedienungsanleitung Seite 7

Mark the drill holes on front side of
MaxiBox (see previous picture also).
Align the screws in the centre of the solar
panel. Please note the drill hole spacing
on the aluminium mount ing bracket.
Screw the mounting bracket with the
solar panel to the energiser. Do not
forget to place the washer on the inside
of the energiser front.
Drill the holes (diameter for drill bit:
approx. 5.5 mm).
Picture of 15 W panel: Screw the mount-
ing bracket to the solar panel (spring
washer and nut M6).
Guide the cable through the opening to
the inside.
Left: picture of 15 W panel:
Right: picture of 25 W panel:
Now, put the 12 V battery in the
energiser compartment and hook
up the connecting cable. The
energiser with solar panel is ready
for use.
- 7 -
Insert two screws each (M6x16) at
the top and bottom of the aluminium
frame of the solar panel.
Picture of 25 W panel: Screw the mount-
ing bracket to the solar panel (spring
washer and nut M6).
Insert the cable socket of the red cable in the
free plug position of the red battery clip. The
black cable should be connected to the black
battery clip as described above.