Fine Tuning Of Tweeter Level - Radical Audio Ra16.2Rf Bedienungsanleitung

FINE TUNING OF TWEETER LEVEL

ATTENTION: Before you start to fine tune tweeter level and presence level, be
sure the following steps have been completed:
z
All wiring work has been done (loudspeakers, crossovers, amplifier are
wired etc).
z
Highpass and lowpass crossover frequency adjustments have been set
provisionally.
z
Input gain level adjustment of satellite- and subwoofer channels (if
applicable) are set
z
All tone controls - including the loudness function – have been reset to their
neutral / zero position.
Fig.: Jumperposition
a
Four different tweeter attenuation levels can be selected, to compensate for
different tweeter mounting locations and – of course – to suit personal
preferences.
s
Slide back the transparent cover of the crossover unit and set the preferred
attenuation level by adjusting the jumper on the circuit board.
8