Nuts - Framus Diablo Pro Gebrauchsanleitung

Turning the truss rod wrench clockwise will tighten the truss rod and give the neck a back
bow; turning the wrench counterclockwise will loosen the truss rod and give the neck a
forward bow.
These adjustments should be done in small steps of 1/4 to 1/2 turn because the neck's
reaction is not instantaneous. You should check the results after approximately one hour and
probably check again the following day. Readjust the truss rod if needed. Particularly during
the changing of seasons or during strong weather fluctuations you should pay attention to
the neck's setup and the corresponding truss rod adjustment, as changes in humidity and
temperature can affect the neck.

5) Nuts

GraphTech BLACK TUSQ XL
Since June 2010 all Framus electric guitars are equipped with GraphTech BLACK TUSQ
XL™ nuts. GraphTech BLACK TUSQ XL nuts have a Teflon lubrication impregnated all the
way through the material, which improves the tuning performance of the guitar significantly,
especially when using a vibrato or bendings. The highly resonant BLACK TUSQ XL material
also brings out hidden harmonics in the guitar.
Locking Nut:
Guitars that come with a Floyd Rose Vibrato System feature our specially designed locking
nut. This nut locks the strings and guarantees tuning stability even during extreme use of the
Floyd Rose Vibrato System.
TM :
9