Pickup Setup - Framus Diablo Pro Gebrauchsanleitung

6) Pickup Setup

The factory setup for the pickups is such that pressing the lowest and highest string at the
highest fret will create a distance of 2 mm (0.08") between strings and pickup. Use a Philips
head screwdriver to adjust the pickup height.
The closer the pickup is to the strings, the higher the output and the sustain decreases.
Normally the bridge pickup should be closer to the strings then the neck pickup.
7) Bridges and Vibratos
Fixed Bridges:
TonePros Tune-O-Matic & Stop Tailpiece
Models: Mayfield Pro, Mayfield Legacy, Panthera Pro, Panthera Supreme, Phil XG P90 /
Humbucker
The Tune-o-Matic Bridge and the Stop-Tailpiece are lockable with screws.
TonePros Wraparound Bridge
Models: Diablo Supreme
With the wraparound bridges the strings are threaded through the bridge from the pickup
side.
7
10