Tuners / Stringing And Tuning - Framus Diablo Pro Gebrauchsanleitung

1) Tuners - Stringing/Tuning
Locking Tuners:
All of our Framus guitars made in Germany come standard with Graph Tech
Ratio Locking Machine Heads which are famous for their tuning stability, smooth
movement, and ease of use.
Graph Tech Machine Heads
Stringing/Tuning:
Stringing your guitar is simple. First, make sure that the knurled head screw
located at the back of the tuner is loosened all the way. Next, insert the string
through the hole in the tuning post, while tightening it by pulling on it gently with
one hand. Then lock the string in position by turning the knurled head screw
clockwise as far as it will go. Subsequently, tune the string to pitch as normal. If
you would like to remove it again, loosen the string tension and turn the knurled
head screw counter-clockwise until the string comes loose.
See P. 11 for a description of the stringing/tuning-process with the Floyd Rose
Vibrato.
6