Maintenance; Faults / Trouble-Shooting - Vasner Cooly Bedienungsanleitung

dust from entering the device in key places.
• To avoid damaging the plastic and display, do not use any abrasive cleaning
agents or chemicals.

Maintenance

In general, the VASNER Cooly does not require any maintenance. The fan must
not be opened by unauthorised persons. If there seems to be a problem, con-
tact your dealer.
Service and repair
If you notice any damage or a fault with your Cooly, it must be checked and
repaired by a specialist. This may be a qualified electrician or your dealer. Dam-
age or faults arising from unauthorised repairs, as well as modifications to the
fan, misuse, negligence, and improper or inadequate maintenance void the
warranty. Dealers and the manufacturer shall not be liable.
Disposal
The VASNER Cooly must not be disposed of together with your normal house-
hold waste. Please take the fan to your local recycling centre to dispose of it.
Faults & troubleshooting
Fault
The Off button does not light
up, the fan does not start, there
is no mist
There is no mist
The mist smells funny
The tank display lights up, but
there is no wind or mist
Too little mist
Possible cause
The fan is not plugged in. The
fuse has tripped.
No water in the tank. The valve
in the tank opening is trapped.
The water tank is not clean.
The water level is too high.
The valve may be dirty.
GB
VASNER
Solution
Plug the fan in. Reset the fuse.
Fill with water. Gently move the
valve with your finger.
Clean the water unit & tank. Fill
with clean water.
Remove some water.
Clean the water unit.
19