Werbung
2 Configure the Network Settings
a The iSCSI Storage Appliance you added is
automatically selected in the Wizard. Click
Next to configure Network Values.
b Set Network and CLI Values (host name,
domain name, default gateway, up to three
domain name servers, and CLI passwords)
or accept the defaults. Click Next.
c
Set values for each of your active Ethernet
ports, then click Next.
•
ETH0 can be either a management
port only or it can double as both a management
and an iSCSI port.
•
Verify that the DHCP box is cleared on each port
and a static IP address, subnet mask, and broadcast address are provided.
•
A Caution displays asking you to make sure the IP address you entered is valid and not in use. Click
certain the IP address is valid or click No and modify the address.
d Set the date, time, and time zone (verify that the Use current date and time box is checked), then click Next. Confirm
your selections and click Apply.
e A Registration dialog box opens. Click Register Now to register your iSCSI Storage Appliance.
2 Create and Configure RAID Pools
3 Provision Storage
a On the Provision Storage screen, set the size, label,
and drive letter information for your pools. Then
select Advanced Settings to configure Partition style
and Authentication method.
b Once you have provisioned storage, click Apply to
finish your configuration. When asked if you want to
create the volume, click Yes.
a
On the Configure RAID Pools screen, create pools using either
Express or Custom configuration.
•
If you select Express, the default configuration is a RAID 5
with one hot spare.
• If you select Custom, you configure the pools and RAID
levels based on your system requirements. See the Snap
Server 700i Series User's Guide or ASM online help for
information on custom-configuring pools.
b
On the Configuration Summary screen, verify your
configuration and click Apply. Click Next to provision storage.
When finished, you will see a display of your
iSCSI Storage Appliance configuration.
You now have a fully configured iSCSI storage
volume, which is available for use immediately.
You do not need to wait until the build/verify
process finishes.
Yes if you are
Werbung
